Батники - вопросы и решения

ftp

ftp /?
Обмен файлами с компьютером, на котором запущена служба
сервера FTP. FTP может использоваться интерактивно.
FTP [-v] [-d] [-i] [-n] [-g] [-s:имя_файла] [-a] [-A] [-x:sendbuffer]
[-r:recvbuffer] [-b:asyncbuffers] [-w:windowsize] [узел]
-v Отключение вывода на экран ответов с удаленного сервера.
-n Отключение автоматического входа при начальном подключении.
-i Отключение интерактивных запросов при передаче нескольких
файлов.
-d Включение отладочного режима.
-g Отключение глобализации имен файлов (см. команду GLOB).
-s:имя_файла Задание текстового файла, содержащего команды FTP, которые
будут выполняться автоматически при запуске FTP.
-a Использование локального интерфейса для привязки соединения.
-A Анонимный вход в службу.
-x:send sockbuf Переопределение стандартного размера буфера SO_SNDBUF (8192).
-r:recv sockbuf Переопределение стандартного размера буфера SO_RCVBUF (8192).
-b:async count Переопределение стандартного размера счетчика async (3)
-w:windowsize Переопределение стандартного размера буфера передачи (65535).
узел Задание имени или адреса IP удаленного узла,
к которому необходимо выполнить подключение.
Примечания:
- команды mget и mput принимают параметры y/n/q как YES/NO/QUIT.
- для прекращения выполнения команд нажмите <CTRL>+<C>.

wget

wget.exe --help
GNU Wget 1.21.3, a non-interactive network retriever.
Usage: wget [OPTION]... [URL]...
Mandatory arguments to long options are mandatory for short options too.
Startup:
-V, --version display the version of Wget and exit
-h, --help print this help
-b, --background go to background after startup
-e, --execute=COMMAND execute a `.wgetrc'-style command
Logging and input file:
-o, --output-file=FILE log messages to FILE
-a, --append-output=FILE append messages to FILE
-d, --debug print lots of debugging information
-q, --quiet quiet (no output)
-v, --verbose be verbose (this is the default)
-nv, --no-verbose turn off verboseness, without being quiet
--report-speed=TYPE output bandwidth as TYPE. TYPE can be bits
-i, --input-file=FILE download URLs found in local or external FILE
--input-metalink=FILE download files covered in local Metalink FILE
-F, --force-html treat input file as HTML
-B, --base=URL resolves HTML input-file links (-i -F)
relative to URL
--config=FILE specify config file to use
--no-config do not read any config file
--rejected-log=FILE log reasons for URL rejection to FILE
Download:
-t, --tries=NUMBER set number of retries to NUMBER (0 unlimits)
--retry-connrefused retry even if connection is refused
--retry-on-http-error=ERRORS comma-separated list of HTTP errors to retry
-O, --output-document=FILE write documents to FILE
-nc, --no-clobber skip downloads that would download to
existing files (overwriting them)
--no-netrc don't try to obtain credentials from .netrc
-c, --continue resume getting a partially-downloaded file
--start-pos=OFFSET start downloading from zero-based position OFFSET
--progress=TYPE select progress gauge type
--show-progress display the progress bar in any verbosity mode
-N, --timestamping don't re-retrieve files unless newer than
local
--no-if-modified-since don't use conditional if-modified-since get
requests in timestamping mode
--no-use-server-timestamps don't set the local file's timestamp by
the one on the server
-S, --server-response print server response
--spider don't download anything
-T, --timeout=SECONDS set all timeout values to SECONDS
--dns-servers=ADDRESSES list of DNS servers to query (comma separated)
--bind-dns-address=ADDRESS bind DNS resolver to ADDRESS (hostname or IP) on local host
--dns-timeout=SECS set the DNS lookup timeout to SECS
--connect-timeout=SECS set the connect timeout to SECS
--read-timeout=SECS set the read timeout to SECS
-w, --wait=SECONDS wait SECONDS between retrievals
(applies if more then 1 URL is to be retrieved)
--waitretry=SECONDS wait 1..SECONDS between retries of a retrieval
(applies if more then 1 URL is to be retrieved)
--random-wait wait from 0.5*WAIT...1.5*WAIT secs between retrievals
(applies if more then 1 URL is to be retrieved)
--no-proxy explicitly turn off proxy
-Q, --quota=NUMBER set retrieval quota to NUMBER
--bind-address=ADDRESS bind to ADDRESS (hostname or IP) on local host
--limit-rate=RATE limit download rate to RATE
--no-dns-cache disable caching DNS lookups
--restrict-file-names=OS restrict chars in file names to ones OS allows
--ignore-case ignore case when matching files/directories
-4, --inet4-only connect only to IPv4 addresses
-6, --inet6-only connect only to IPv6 addresses
--prefer-family=FAMILY connect first to addresses of specified family,
one of IPv6, IPv4, or none
--user=USER set both ftp and http user to USER
--password=PASS set both ftp and http password to PASS
--ask-password prompt for passwords
--use-askpass=COMMAND specify credential handler for requesting
username and password. If no COMMAND is
specified the WGET_ASKPASS or the SSH_ASKPASS
environment variable is used.
--no-iri turn off IRI support
--local-encoding=ENC use ENC as the local encoding for IRIs
--remote-encoding=ENC use ENC as the default remote encoding
--unlink remove file before clobber
--keep-badhash keep files with checksum mismatch (append .badhash)
--metalink-index=NUMBER Metalink application/metalink4+xml metaurl ordinal NUMBER
--metalink-over-http use Metalink metadata from HTTP response headers
--preferred-location preferred location for Metalink resources
Directories:
-nd, --no-directories don't create directories
-x, --force-directories force creation of directories
-nH, --no-host-directories don't create host directories
--protocol-directories use protocol name in directories
-P, --directory-prefix=PREFIX save files to PREFIX/..
--cut-dirs=NUMBER ignore NUMBER remote directory components
HTTP options:
--http-user=USER set http user to USER
--http-password=PASS set http password to PASS
--no-cache disallow server-cached data
--default-page=NAME change the default page name (normally
this is 'index.html'.)
-E, --adjust-extension save HTML/CSS documents with proper extensions
--ignore-length ignore 'Content-Length' header field
--header=STRING insert STRING among the headers
--compression=TYPE choose compression, one of auto, gzip and none. (default: none)
--max-redirect maximum redirections allowed per page
--proxy-user=USER set USER as proxy username
--proxy-password=PASS set PASS as proxy password
--referer=URL include 'Referer: URL' header in HTTP request
--save-headers save the HTTP headers to file
-U, --user-agent=AGENT identify as AGENT instead of Wget/VERSION
--no-http-keep-alive disable HTTP keep-alive (persistent connections)
--no-cookies don't use cookies
--load-cookies=FILE load cookies from FILE before session
--save-cookies=FILE save cookies to FILE after session
--keep-session-cookies load and save session (non-permanent) cookies
--post-data=STRING use the POST method; send STRING as the data
--post-file=FILE use the POST method; send contents of FILE
--method=HTTPMethod use method "HTTPMethod" in the request
--body-data=STRING send STRING as data. --method MUST be set
--body-file=FILE send contents of FILE. --method MUST be set
--content-disposition honor the Content-Disposition header when
choosing local file names (EXPERIMENTAL)
--content-on-error output the received content on server errors
--auth-no-challenge send Basic HTTP authentication information
without first waiting for the server's
challenge
HTTPS (SSL/TLS) options:
--secure-protocol=PR choose secure protocol, one of auto, SSLv2,
SSLv3, TLSv1, TLSv1_1, TLSv1_2, TLSv1_3 and PFS
--https-only only follow secure HTTPS links
--no-check-certificate don't validate the server's certificate
--certificate=FILE client certificate file
--certificate-type=TYPE client certificate type, PEM or DER
--private-key=FILE private key file
--private-key-type=TYPE private key type, PEM or DER
--ca-certificate=FILE file with the bundle of CAs 23:11
--ca-directory=DIR directory where hash list of CAs is stored
--crl-file=FILE file with bundle of CRLs
--pinnedpubkey=FILE/HASHES Public key (PEM/DER) file, or any number
of base64 encoded sha256 hashes preceded by
'sha256//' and separated by ';', to verify
peer against
--random-file=FILE file with random data for seeding the SSL PRNG
--ciphers=STR Set the priority string (GnuTLS) or cipher list string (OpenSSL) directly.
Use with care. This option overrides --secure-protocol.
The format and syntax of this string depend on the specific SSL/TLS engine.
HSTS options:
--no-hsts disable HSTS
--hsts-file path of HSTS database (will override default)
FTP options:
--ftp-user=USER set ftp user to USER
--ftp-password=PASS set ftp password to PASS
--no-remove-listing don't remove '.listing' files
--no-glob turn off FTP file name globbing
--no-passive-ftp disable the "passive" transfer mode
--preserve-permissions preserve remote file permissions
--retr-symlinks when recursing, get linked-to files (not dir)
FTPS options:
--ftps-implicit use implicit FTPS (default port is 990)
--ftps-resume-ssl resume the SSL/TLS session started in the control connection when
opening a data connection
--ftps-clear-data-connection cipher the control channel only; all the data will be in plaintext
--ftps-fallback-to-ftp fall back to FTP if FTPS is not supported in the target server
WARC options:
--warc-file=FILENAME save request/response data to a .warc.gz file
--warc-header=STRING insert STRING into the warcinfo record
--warc-max-size=NUMBER set maximum size of WARC files to NUMBER
--warc-cdx write CDX index files
--warc-dedup=FILENAME do not store records listed in this CDX file
--no-warc-compression do not compress WARC files with GZIP
--no-warc-digests do not calculate SHA1 digests
--no-warc-keep-log do not store the log file in a WARC record
--warc-tempdir=DIRECTORY location for temporary files created by the
WARC writer
Recursive download:
-r, --recursive specify recursive download
-l, --level=NUMBER maximum recursion depth (inf or 0 for infinite)
--delete-after delete files locally after downloading them
-k, --convert-links make links in downloaded HTML or CSS point to
local files
--convert-file-only convert the file part of the URLs only (usually known as the basename)
--backups=N before writing file X, rotate up to N backup files
-K, --backup-converted before converting file X, back up as X.orig
-m, --mirror shortcut for -N -r -l inf --no-remove-listing
-p, --page-requisites get all images, etc. needed to display HTML page
--strict-comments turn on strict (SGML) handling of HTML comments
Recursive accept/reject:
-A, --accept=LIST comma-separated list of accepted extensions
-R, --reject=LIST comma-separated list of rejected extensions
--accept-regex=REGEX regex matching accepted URLs
--reject-regex=REGEX regex matching rejected URLs
--regex-type=TYPE regex type (posix|pcre)
-D, --domains=LIST comma-separated list of accepted domains
--exclude-domains=LIST comma-separated list of rejected domains
--follow-ftp follow FTP links from HTML documents
--follow-tags=LIST comma-separated list of followed HTML tags
--ignore-tags=LIST comma-separated list of ignored HTML tags
-H, --span-hosts go to foreign hosts when recursive
-L, --relative follow relative links only
-I, --include-directories=LIST list of allowed directories
--trust-server-names use the name specified by the redirection
URL's last component
-X, --exclude-directories=LIST list of excluded directories
-np, --no-parent don't ascend to the parent directory
Email bug reports, questions, discussions to <bug-wget@gnu.org>
and/or open issues at https://savannah.gnu.org/bugs/?func=additem&group=wget.

curl

curl.exe --help all
Usage: curl [options...] <url>
--abstract-unix-socket <path> Connect via abstract Unix domain socket
--alt-svc <file name> Enable alt-svc with this cache file
--anyauth Pick any authentication method
-a, --append Append to target file when uploading
--aws-sigv4 <provider1[:provider2[:region[:service]]]> Use AWS V4 signature authentication
--basic Use HTTP Basic Authentication
--cacert <file> CA certificate to verify peer against
--capath <dir> CA directory to verify peer against
-E, --cert <certificate[:password]> Client certificate file and password
--cert-status Verify the status of the server cert via OCSP-staple
--cert-type <type> Certificate type (DER/PEM/ENG/P12)
--ciphers <list of ciphers> SSL ciphers to use
--compressed Request compressed response
--compressed-ssh Enable SSH compression
-K, --config <file> Read config from a file
--connect-timeout <fractional seconds> Maximum time allowed for connection
--connect-to <HOST1:PORT1:HOST2:PORT2> Connect to host
-C, --continue-at <offset> Resumed transfer offset
-b, --cookie <data|filename> Send cookies from string/file
-c, --cookie-jar <filename> Write cookies to <filename> after operation
--create-dirs Create necessary local directory hierarchy
--create-file-mode <mode> File mode for created files
--crlf Convert LF to CRLF in upload
--crlfile <file> Use this CRL list
--curves <algorithm list> (EC) TLS key exchange algorithm(s) to request
-d, --data <data> HTTP POST data
--data-ascii <data> HTTP POST ASCII data
--data-binary <data> HTTP POST binary data
--data-raw <data> HTTP POST data, '@' allowed
--data-urlencode <data> HTTP POST data URL encoded
--delegation <LEVEL> GSS-API delegation permission
--digest Use HTTP Digest Authentication
-q, --disable Disable .curlrc
--disable-eprt Inhibit using EPRT or LPRT
--disable-epsv Inhibit using EPSV
--disallow-username-in-url Disallow username in URL
--dns-interface <interface> Interface to use for DNS requests
--dns-ipv4-addr <address> IPv4 address to use for DNS requests
--dns-ipv6-addr <address> IPv6 address to use for DNS requests
--dns-servers <addresses> DNS server addrs to use
--doh-cert-status Verify the status of the DoH server cert via OCSP-staple
--doh-insecure Allow insecure DoH server connections
--doh-url <URL> Resolve host names over DoH
-D, --dump-header <filename> Write the received headers to <filename>
--egd-file <file> EGD socket path for random data
--engine <name> Crypto engine to use
--etag-compare <file> Pass an ETag from a file as a custom header
--etag-save <file> Parse ETag from a request and save it to a file
--expect100-timeout <seconds> How long to wait for 100-continue
-f, --fail Fail fast with no output on HTTP errors
--fail-early Fail on first transfer error, do not continue
--fail-with-body Fail on HTTP errors but save the body
--false-start Enable TLS False Start
-F, --form <name=content> Specify multipart MIME data
--form-escape Escape multipart form field/file names using backslash
--form-string <name=string> Specify multipart MIME data
--ftp-account <data> Account data string
--ftp-alternative-to-user <command> String to replace USER [name]
--ftp-create-dirs Create the remote dirs if not present
--ftp-method <method> Control CWD usage
--ftp-pasv Use PASV/EPSV instead of PORT
-P, --ftp-port <address> Use PORT instead of PASV
--ftp-pret Send PRET before PASV
--ftp-skip-pasv-ip Skip the IP address for PASV
--ftp-ssl-ccc Send CCC after authenticating
--ftp-ssl-ccc-mode <active/passive> Set CCC mode
--ftp-ssl-control Require SSL/TLS for FTP login, clear for transfer
-G, --get Put the post data in the URL and use GET
-g, --globoff Disable URL sequences and ranges using {} and []
--happy-eyeballs-timeout-ms <milliseconds> Time for IPv6 before trying IPv4
--haproxy-protocol Send HAProxy PROXY protocol v1 header
-I, --head Show document info only
-H, --header <header/@file> Pass custom header(s) to server
-h, --help <category> Get help for commands
--hostpubmd5 <md5> Acceptable MD5 hash of the host public key
--hostpubsha256 <sha256> Acceptable SHA256 hash of the host public key
--hsts <file name> Enable HSTS with this cache file
--http0.9 Allow HTTP 0.9 responses
-0, --http1.0 Use HTTP 1.0
--http1.1 Use HTTP 1.1
--http2 Use HTTP 2
--http2-prior-knowledge Use HTTP 2 without HTTP/1.1 Upgrade
--http3 Use HTTP v3
--ignore-content-length Ignore the size of the remote resource
-i, --include Include protocol response headers in the output
-k, --insecure Allow insecure server connections
--interface <name> Use network INTERFACE (or address)
-4, --ipv4 Resolve names to IPv4 addresses
-6, --ipv6 Resolve names to IPv6 addresses
--json <data> HTTP POST JSON
-j, --junk-session-cookies Ignore session cookies read from file
--keepalive-time <seconds> Interval time for keepalive probes
--key <key> Private key file name
--key-type <type> Private key file type (DER/PEM/ENG)
--krb <level> Enable Kerberos with security <level>
--libcurl <file> Dump libcurl equivalent code of this command line
--limit-rate <speed> Limit transfer speed to RATE
-l, --list-only List only mode
--local-port <num/range> Force use of RANGE for local port numbers
-L, --location Follow redirects
--location-trusted Like --location, and send auth to other hosts
--login-options <options> Server login options
--mail-auth <address> Originator address of the original email
--mail-from <address> Mail from this address
--mail-rcpt <address> Mail to this address
--mail-rcpt-allowfails Allow RCPT TO command to fail for some recipients
-M, --manual Display the full manual
--max-filesize <bytes> Maximum file size to download
--max-redirs <num> Maximum number of redirects allowed
-m, --max-time <fractional seconds> Maximum time allowed for transfer
--metalink Process given URLs as metalink XML file
--negotiate Use HTTP Negotiate (SPNEGO) authentication
-n, --netrc Must read .netrc for user name and password
--netrc-file <filename> Specify FILE for netrc
--netrc-optional Use either .netrc or URL
-:, --next Make next URL use its separate set of options
--no-alpn Disable the ALPN TLS extension
-N, --no-buffer Disable buffering of the output stream
--no-clobber Do not overwrite files that already exist
--no-keepalive Disable TCP keepalive on the connection
--no-npn Disable the NPN TLS extension
--no-progress-meter Do not show the progress meter
--no-sessionid Disable SSL session-ID reusing
--noproxy <no-proxy-list> List of hosts which do not use proxy
--ntlm Use HTTP NTLM authentication
--ntlm-wb Use HTTP NTLM authentication with winbind
--oauth2-bearer <token> OAuth 2 Bearer Token
-o, --output <file> Write to file instead of stdout
--output-dir <dir> Directory to save files in
-Z, --parallel Perform transfers in parallel
--parallel-immediate Do not wait for multiplexing (with --parallel)
--parallel-max <num> Maximum concurrency for parallel transfers
--pass <phrase> Pass phrase for the private key
--path-as-is Do not squash .. sequences in URL path
--pinnedpubkey <hashes> FILE/HASHES Public key to verify peer against
--post301 Do not switch to GET after following a 301
--post302 Do not switch to GET after following a 302
--post303 Do not switch to GET after following a 303
--preproxy [protocol://]host[:port] Use this proxy first
-#, --progress-bar Display transfer progress as a bar
--proto <protocols> Enable/disable PROTOCOLS
--proto-default <protocol> Use PROTOCOL for any URL missing a scheme
--proto-redir <protocols> Enable/disable PROTOCOLS on redirect
-x, --proxy [protocol://]host[:port] Use this proxy
--proxy-anyauth Pick any proxy authentication method
--proxy-basic Use Basic authentication on the proxy
--proxy-cacert <file> CA certificate to verify peer against for proxy
--proxy-capath <dir> CA directory to verify peer against for proxy
--proxy-cert <cert[:passwd]> Set client certificate for proxy
--proxy-cert-type <type> Client certificate type for HTTPS proxy
--proxy-ciphers <list> SSL ciphers to use for proxy
--proxy-crlfile <file> Set a CRL list for proxy
--proxy-digest Use Digest authentication on the proxy
--proxy-header <header/@file> Pass custom header(s) to proxy
--proxy-insecure Do HTTPS proxy connections without verifying the proxy
--proxy-key <key> Private key for HTTPS proxy
--proxy-key-type <type> Private key file type for proxy
--proxy-negotiate Use HTTP Negotiate (SPNEGO) authentication on the proxy
--proxy-ntlm Use NTLM authentication on the proxy
--proxy-pass <phrase> Pass phrase for the private key for HTTPS proxy
--proxy-pinnedpubkey <hashes> FILE/HASHES public key to verify proxy with
--proxy-service-name <name> SPNEGO proxy service name
--proxy-ssl-allow-beast Allow security flaw for interop for HTTPS proxy
--proxy-ssl-auto-client-cert Use auto client certificate for proxy (Schannel)
--proxy-tls13-ciphers <ciphersuite list> TLS 1.3 proxy cipher suites
--proxy-tlsauthtype <type> TLS authentication type for HTTPS proxy
--proxy-tlspassword <string> TLS password for HTTPS proxy
--proxy-tlsuser <name> TLS username for HTTPS proxy
--proxy-tlsv1 Use TLSv1 for HTTPS proxy
-U, --proxy-user <user:password> Proxy user and password
--proxy1.0 <host[:port]> Use HTTP/1.0 proxy on given port
-p, --proxytunnel Operate through an HTTP proxy tunnel (using CONNECT) 23:29
--pubkey <key> SSH Public key file name
-Q, --quote <command> Send command(s) to server before transfer
--random-file <file> File for reading random data from
-r, --range <range> Retrieve only the bytes within RANGE
--rate <max request rate> Request rate for serial transfers
--raw Do HTTP "raw"; no transfer decoding
-e, --referer <URL> Referrer URL
-J, --remote-header-name Use the header-provided filename
-O, --remote-name Write output to a file named as the remote file
--remote-name-all Use the remote file name for all URLs
-R, --remote-time Set the remote file's time on the local output
--remove-on-error Remove output file on errors
-X, --request <method> Specify request method to use
--request-target <path> Specify the target for this request
--resolve <[+]host:port:addr[,addr]...> Resolve the host+port to this address
--retry <num> Retry request if transient problems occur
--retry-all-errors Retry all errors (use with --retry)
--retry-connrefused Retry on connection refused (use with --retry)
--retry-delay <seconds> Wait time between retries
--retry-max-time <seconds> Retry only within this period
--sasl-authzid <identity> Identity for SASL PLAIN authentication
--sasl-ir Enable initial response in SASL authentication
--service-name <name> SPNEGO service name
-S, --show-error Show error even when -s is used
-s, --silent Silent mode
--socks4 <host[:port]> SOCKS4 proxy on given host + port
--socks4a <host[:port]> SOCKS4a proxy on given host + port
--socks5 <host[:port]> SOCKS5 proxy on given host + port
--socks5-basic Enable username/password auth for SOCKS5 proxies
--socks5-gssapi Enable GSS-API auth for SOCKS5 proxies
--socks5-gssapi-nec Compatibility with NEC SOCKS5 server
--socks5-gssapi-service <name> SOCKS5 proxy service name for GSS-API
--socks5-hostname <host[:port]> SOCKS5 proxy, pass host name to proxy
-Y, --speed-limit <speed> Stop transfers slower than this
-y, --speed-time <seconds> Trigger 'speed-limit' abort after this time
--ssl Try SSL/TLS
--ssl-allow-beast Allow security flaw to improve interop
--ssl-auto-client-cert Use auto client certificate (Schannel)
--ssl-no-revoke Disable cert revocation checks (Schannel)
--ssl-reqd Require SSL/TLS
--ssl-revoke-best-effort Ignore missing/offline cert CRL dist points
-2, --sslv2 Use SSLv2
-3, --sslv3 Use SSLv3
--stderr <file> Where to redirect stderr
--styled-output Enable styled output for HTTP headers
--suppress-connect-headers Suppress proxy CONNECT response headers
--tcp-fastopen Use TCP Fast Open
--tcp-nodelay Use the TCP_NODELAY option
-t, --telnet-option <opt=val> Set telnet option
--tftp-blksize <value> Set TFTP BLKSIZE option
--tftp-no-options Do not send any TFTP options
-z, --time-cond <time> Transfer based on a time condition
--tls-max <VERSION> Set maximum allowed TLS version
--tls13-ciphers <ciphersuite list> TLS 1.3 cipher suites to use
--tlsauthtype <type> TLS authentication type
--tlspassword <string> TLS password
--tlsuser <name> TLS user name
-1, --tlsv1 Use TLSv1.0 or greater
--tlsv1.0 Use TLSv1.0 or greater
--tlsv1.1 Use TLSv1.1 or greater
--tlsv1.2 Use TLSv1.2 or greater
--tlsv1.3 Use TLSv1.3 or greater
--tr-encoding Request compressed transfer encoding
--trace <file> Write a debug trace to FILE
--trace-ascii <file> Like --trace, but without hex output
--trace-time Add time stamps to trace/verbose output
--unix-socket <path> Connect through this Unix domain socket
-T, --upload-file <file> Transfer local FILE to destination
--url <url> URL to work with
-B, --use-ascii Use ASCII/text transfer
-u, --user <user:password> Server user and password
-A, --user-agent <name> Send User-Agent <name> to server
-v, --verbose Make the operation more talkative
-V, --version Show version number and quit
-w, --write-out <format> Use output FORMAT after completion
--xattr Store metadata in extended file attributes

wget.ini можно и опциями

https_proxy=<https_proxy>.ru:8080
http_proxy=<http_proxy>.ru:8080
ftp_proxy=<ftp_proxy>.ru:8080
use_proxy=on
proxy-user=<user>
proxy-passwd=<pswd>
# Tune HTTPS security (auto, SSLv2, SSLv3, TLSv1, PFS)
#secureprotocol = auto